Features as follows
(1) Spike: without air vented ,material：ABS
(2) Spike protector: material：PP
(3) Air vented（Red）material：PE with 0.25μm pore size of the hydrophobic membrane
(4) Drip chamber: material：PVC ; specification： 98mm
(5) Blood tubular filter：medical grade PA6-6 with ABS frame; Its specification：φ17.3×62mm
wire diameter of monofilament：100±10μm；pore size：200±20μm；
(6) Flow rate：The filter shall deliver no less than 1000ml of blood at(23±2)℃ in 30mins with a pressure difference of
10kPa and it shall also deliver no less than 500ml of blood in 2mins under a pressure difference of 30kPa above atmospheric pressure.
(7)PVC tubing length：1.50m；Tube I.D.:3.0mm,O.D.:4.1mm；the length of short tube:200mm
(8)Y injection port with Latex, heat sealing type
(9)Flow regulator：material：ABS （roller wheel）：PP specification：48mm
(10)Male luer lock connector：material：ABS with 6% luer lock taper conforming to international standard
(11)Hypodermic needle：O.D.: 1.2mm;18G,pink,it’s length: 38mm (As your specific requirements)
Options Available
- with or without air vented spike
- with or without hypodermic needle
- Plastic frame of blood tubular filter： ABS、ABS(white)、PP、BS
-Y connector with latex or latex-free
- Flow regulator： 57mm、48mm、45mm
- Luer lock connector：5 kinds of luer adaptor and 2 kinds of luer slip
Packaging: Paper Plastic Pouch or PE package
|
|
|
|
|
