Features as follows：
① Spike material：ABS
② Spike protective cap material：PP
③ Air vent（Blue）material：PE with 0.25 pore size of the hydrophobic membrane
④ Drip chamber：material：PVC；specification：57mm
⑤ Infusion filter：mesh material：medical grade PA6-6，Plastic frame：ABS；specification：φ14.2×3.7mm
wire diameter of monofilament：48μm；pore size：15+3/-2μm；Filtration rate：85%
⑥ Flow rate：For the infusion set with 20drops/ml,The filter shall deliver no less than 1000ml of sodium chloride(Quality thickness Nacl=9g/l) at(23±2)℃ in 10mins with a pressure difference of 10kPa
⑦ Tube length：1.5m；the length of short tube：200mm
⑧ Y injection port：Caltrop heat sealing type, Latex-free
⑨ Roller clamp：specification：57mm；material：ABS
⑽Hypodermic needle：O.D：0.80mm; specification：21G，green;(As per your specific requirements))
Options Available：
- With or without air vented spike;
- With or without needle;
- With or without “Y” injection port(Latex or Latex free);
- Roller clamp：57mm、45mm available,
- 5 kinds of Luer lock and 2 kinds of luer slip available
Packaging： Paper Plastic Pouch or PE package
|
|
|
|
|
