Features as follows：
⑴ Spike without air vented：material：ABS
⑵ Spike protective cap：material：PP
⑶ Purple drip chamber：material：PVC； specification：72mm
⑷ Infusion filter：mesh material: medical grade PA6-6; Plastic frame: ABS；Its specification：15.3×3.7mm；
wire diameter of monofilament：48μm；pore size：15+3/-2μm；Filtration rate：85%
⑸ Flow rate：For the infusion set with 20drops/ml,The filter shall deliver no less than 1000ml of sodium chloride(Quality thickness Nacl=9g/l) at(23±2)℃ in 10mins with a pressure difference of 10kPa
⑹ Tube length：1.50m,I.D.:3.0mm,O.D.:4.1mm；the length of short tubing：200mm
⑺ Y connector：Caltrop heat sealing type, latex-free
⑻ Roller clamp：Specification：57mm material：ABS the pathway can be hung by this design
⑼ Male luer lock connector：material：ABS with 6% luer lock taper conforming to international standard
⑽ Hypodermic needle：OD：0.80mm；specification：21G，green；(as per your specific requirements)
Options Available：
- With or without air vented spike
- With or without “Y” injection port(Latex or Latex-free)
- With Roller clamp： 48mm、45mm available
- 5 kinds of Luer lock or 2 kinds of luer slip available
Packaging：Paper Plastic Pouch or PE package |
|
|
|
|
