Features as follows：
① Spike：material：ABS
② Spike protective cap material：PP
③ Drip chamber：material：PVC；specification：64mm
④ Infusion filter：mesh material：medical grade PA6-6，Plastic frame：ABS specification：φ14.2*3.7mm
wire diameter of monofilament：48μm pore size：15+3/-2μm； filtration rate：85%
⑤ Flow rate：For the infusion set with 60drops/ml,The filter shall deliver no less than 1000ml of sodium chloride(Quality thickness Nacl=9g/l) at(23±2)℃ in 40mins with a pressure difference of 10kPa
⑥ Tube：length:1.5m,1.7m,1.8m；Tube I.D.:3.0mm,O.D.:4.1mm ；the length of short tube: 200mm
⑦ Y connector：Caltrop heat sealing type, latex-free
⑧ Roller clamp: specification:57mm；material：ABS
⑨ Male Luer lock connector: material: ABS with 6% luer lock taper conforming to international standard
⑩ Hypodermic needle：O.D.:0.80mm, specification：21G,green；(as per your specific requirements)
Options Available：
- With or without air vented spike
- With or without “Y” injection port(Latex or Latex-free)
- With Roller clamp： 48mm、45mm available
- 5 kinds of Luer lock or 2 kinds of luer slip available
Packaging：Paper Plastic Pouch or PE package |
|
|
|
|
