Features as follows
① Spike：material：PC
② Protective Cap：material：PP
③ Air vented(Blue) material：PE with 0.25μm pore size of the hydrophobic membrane
④Drip chamber：material：PVC；specification：57mm
⑤Infusion filter：medical grade PA6-6；plastic frame：ABS; specification：φ15.3×3.7mm
wire diameter of monofilament：48μm；pore size：15+3/-2μm；Filtration rate：85%
⑥Flow rate：For the infusion set with 20drops/ml,The filter shall deliver no less than 1000ml of sodium chloride(Quality thickness Nacl=9g/l) at(23±2)℃ in 10mins with a pressure difference of 10kPa
⑦Tube length：1.50m,PVC；the length of short tubing：200mm
⑧Y connector：Caltrop heat sealing type, latex-free
⑨Roller clamp：specification：57mm material：ABS the tubing pathway can be hung by this design
⑩Male luer lock connector：material：ABS with 6% luer lock taper conforming to international standard
⑾ Hypodermic needle：OD：0.80mm；specification：21G,Green；(As per your specific requirements)
Options Available
- With or without Air vented spike
- With or without “Y” injection port：7 kinds available (latex or latex-free)
- Roller clamp： 48mm、45mm
- 5 kinds of luer lock adaptor and 2 kinds of luer slip available
Packaging： Paper Plastic Pouch or PE package
|
|
|
|
|
