Features as follows
① Spike: material：PC
② Spike protector : material：PP
③ Air vented（Blue）material：PE with 0.25μm pore size of the hydrophobic membrane
④ Drip chamber：material：PVC ; specification：57mm
⑤ Infusion filter：medical grade PA6-6 with ABS frame, its specification：φ15.3×3.7mm；
wire diameter of monofilament：48μm；mesh pore size：15+3/-2μm；Filtration rate：85%
⑥ Flow rate：For the infusion set with 20drops/ml,The filter shall deliver no less than 1000ml of sodium chloride(Quality thickness Nacl=9g/l) at(23±2)℃ in 10mins with a pressure difference of 10kPa
⑦ Tubing length：PVC,1.50m ;Tube I.D.:3.0mm,O.D.:4.1mm;The short tubing pathway：200mm
⑧Needless Y-injector
⑨ Roller clamp: specification：57mm；material：ABS；the pathway can be hung by this design
⑩ Male luer lock connector：material：ABS with 6% luer lock taper conforming to international standard
⑾ Hypodermic needle：OD,0.80mm,21G,Green
Options Available
- With or without air vented spike
-With or without “Y” injection port：7 kinds available(latex or latex-free)
- Roller clamp：45mm、48mm
- 5 kinds of luer lock adaptor and 2 kinds of luer slip available
Packaging：Paper Plastic Pouch or PE package
|
|
|
|
|
